Nyxall VRCS Discord Commands
25 commands. Search for one, filter by who can use it, and open any command for its syntax, permissions and examples.
Back to Nyxall VRCS DiscordHow commands work Type / in Discord and pick a VRCS command.
During the closed beta, Nyxall VRCS Discord answers slash commands: type / in a
server where the bot is, and Discord lists them with their options. Each command below starts with its
slash form.
Prefix commands (messages that start with a prefix) are switched on later in the beta. Their forms are listed too, and a few commands exist only as prefix commands for now.
A prefix is the short mark at the start of a message that tells Nyxall VRCS Discord the message
is meant for it. The default prefix is v!
, so v!setup runs the setup command
.
A server can choose its own prefix. Every command then starts with that prefix instead of
v!. Not sure which prefix your server uses? Mention the bot followed by the word prefix, for
example @VRCS prefix, and it answers with the prefix for that server.
In a syntax line, <something> is required and [something] can be left
out.
Examples use the default v! prefix. Your server may use a different prefix.
Command reference
Setup
Connect a VRChat group to this server and link your account.
-
/vrcs setupManagers & admins Private reply Setup Connect this server to a VRChat group you manage in VRCS.Starts the two-key setup: a server admin asks here, and the group’s manager confirms it in VRCS on their PC after VRCS refreshes their permissions from VRChat. Run it again to choose a group or a reporting timezone.
- Slash command
-
/vrcs setup - Prefix form (later in the beta)
-
v!setup [group] [timezone] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group connection your linked Nyxall account manages.
-
timezoneText · optional - Reporting timezone (IANA name, for example Europe/Amsterdam). Default UTC.
Examples
-
v!setup -
v!setup LAB.0001 -
v!setup LAB.0001 timezone:Europe/Amsterdam
Common errors
- You don't have access to that here.
- Your VRCS access isn't active, so this can't be done. Removing, pausing and disconnecting still work.
- This change widens who sees the group's data, so VRCS must re-check your VRChat group permissions first. Open VRCS on your PC, then try again in a minute.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
-
/linkEveryone Private reply Link Link your Discord account to your Nyxall account, or unlink it.Gives you a one-time code to enter in VRCS on your PC. Linking your account is separate from connecting a server to a group.
- Slash command
-
/link - Prefix form (later in the beta)
-
v!link - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- Only you see the reply
Examples
-
v!link
Common errors
- Slow down a moment.
- The code is sent to you privately and works once.
-
/vrcs disconnectManagers & admins Private reply Disconnect Stop showing a group in this server.Asks first, then stops showing the group (default: every group here). It narrows access, so it always works. The group’s data is controlled by its managers in VRCS.
- Slash command
-
/vrcs disconnect - Prefix form (later in the beta)
-
v!disconnect [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group (default: all groups here).
Examples
-
v!disconnect -
v!disconnect LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
Groups
Moderation at a glance for a connected group.
-
/group summaryStaff Private reply Group summary Moderation at a glance for one group and period.Warnings, instance kicks, bans and unbans in the chosen period, with how complete the data is.
- Slash command
-
/group summary - Prefix form (later in the beta)
-
v!group summary [7d|30d|90d|180d|all] [group] - Who can use it
- Approved staff of the group, its managers, or a server admin
- Discord permission
- None (a group manager approves staff with /vrcs staff)
- VRChat permission
- None
- Reply
- Only you see the reply
Arguments
-
periodOne of : 7d, 30d, 90d, 180d, all · optional - Rolling period: 7d, 30d, 90d, 180d, all.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!group summary -
v!group summary 90d -
v!group summary 30d LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- This group's data is hidden until a group manager's VRCS re-confirms access.
- This group's VRCS access has ended. Data isn't available.
- This group connection needs attention from its manager.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
Moderation
Moderator activity.
-
/mods leaderboardStaff Private reply Mods leaderboard Ranked moderator activity (recorded actions, not quality).Moderators ranked by a measure over the chosen period. It counts recorded actions; it does not measure quality or fairness.
- Slash command
-
/mods leaderboard - Prefix form (later in the beta)
-
v!mods leaderboard [7d|30d|90d|180d|all] [total|warnings|kicks|bans|unbans|latest] [group] - Who can use it
- Approved staff of the group, its managers, or a server admin
- Discord permission
- None (a group manager approves staff with /vrcs staff)
- VRChat permission
- None
- Reply
- Only you see the reply
Arguments
-
periodOne of : 7d, 30d, 90d, 180d, all · optional - Rolling period: 7d, 30d, 90d, 180d, all.
-
rankOne of : total, warnings, kicks, bans, unbans, latest · optional - Measure to rank by: total, warnings, kicks, bans, unbans, latest.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!mods leaderboard -
v!mods leaderboard 90d bans -
v!mods leaderboard 30d latest LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- This group's data is hidden until a group manager's VRCS re-confirms access.
- This group's VRCS access has ended. Data isn't available.
- This group connection needs attention from its manager.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
Instances
Live instances of a group, as connected VRCS clients see them.
-
/instance statusStaff Private reply Instance status Live instances of the group, and how fresh that is.The group’s own instances that a connected VRCS currently reports, with when it last did.
- Slash command
-
/instance status - Prefix form (later in the beta)
-
v!instance status [group] - Who can use it
- Approved staff of the group, its managers, or a server admin
- Discord permission
- None (a group manager approves staff with /vrcs staff)
- VRChat permission
- None
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!instance status -
v!instance status LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- This group's data is hidden until a group manager's VRCS re-confirms access.
- This group's VRCS access has ended. Data isn't available.
- This group connection needs attention from its manager.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
-
/instance membersStaff Private reply Instance members Who is in a live instance of the group right now.The people a connected VRCS reports in the group’s live instances.
- Slash command
-
/instance members - Prefix form (later in the beta)
-
v!instance members [group] - Who can use it
- Approved staff of the group, its managers, or a server admin
- Discord permission
- None (a group manager approves staff with /vrcs staff)
- VRChat permission
- None
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!instance members
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- This group's data is hidden until a group manager's VRCS re-confirms access.
- This group's VRCS access has ended. Data isn't available.
- This group connection needs attention from its manager.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
-
/instance userStaff Private reply Instance user Is someone in a live instance of the group right now?Looks for one person by VRChat display name (exact) or user id, or by a Discord member with a linked VRChat account.
- Slash command
-
/instance user - Prefix form (later in the beta)
-
v!instance user [@member] [vrchat] [group] - Who can use it
- Approved staff of the group, its managers, or a server admin
- Discord permission
- None (a group manager approves staff with /vrcs staff)
- VRChat permission
- None
- Reply
- Only you see the reply
Arguments
-
memberMember · optional - A Discord member with a linked VRChat account (@member).
-
vrchatText · optional - A VRChat display name (exact; quote names with spaces) or user id.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!instance user "Display Name" -
v!instance user @Member -
v!instance user usr_00000000-0000-4000-8000-000000000001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- This group's data is hidden until a group manager's VRCS re-confirms access.
- This group's VRCS access has ended. Data isn't available.
- This group connection needs attention from its manager.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
- Give either a VRChat name or id, or a Discord member.
Staff
Who may see a group here.
-
/vrcs staffManagers & admins Private reply Staff list The staff and open access requests of a group in this server.Lists who may see the group here, with buttons to approve or decline requests and remove staff when you manage the group.
- Slash command
-
/vrcs staff - Prefix form (later in the beta)
-
v!staff list [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!staff -
v!staff list LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
-
v!staff addManagers & admins Private reply Prefix only, later in the beta Staff add Approve a server member as staff for a group.Gives the member access to the group’s views here. It widens access, so VRCS re-checks your VRChat permissions first when needed.
- Prefix form (later in the beta)
-
v!staff add @member [group] - Who can use it
- A manager of the group (with a linked Nyxall account)
- Discord permission
- None
- VRChat permission
- Owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
memberMember · required - The member to approve (@member).
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!staff add @Moderator -
v!staff add @Moderator LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Your VRCS access isn't active, so this can't be done. Removing, pausing and disconnecting still work.
- This change widens who sees the group's data, so VRCS must re-check your VRChat group permissions first. Open VRCS on your PC, then try again in a minute.
- Can't confirm access right now. Try again in a few minutes.
- Slow down a moment.
- The slash command did this with the member picker in the staff view.
-
v!staff removeManagers & admins Private reply Prefix only, later in the beta Staff remove Remove a member’s staff access for a group.Removes the member’s access to the group’s views here. Narrowing access always works, also when a subscription has ended.
- Prefix form (later in the beta)
-
v!staff remove @member [group] - Who can use it
- A manager of the group (with a linked Nyxall account)
- Discord permission
- None
- VRChat permission
- Owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
memberMember · required - The staff member to remove (@member).
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!staff remove @Moderator
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
- The slash command did this with the Remove button in the staff view.
Logs
Where VRCS posts a group’s events in this server.
-
/vrcs logs listManagers & admins Private reply Logs list Where each kind of event goes, and which channels wait for approval.The default channel, the channels chosen per event type or category, event types switched off, and channels waiting for a second approval.
- Slash command
-
/vrcs logs list - Prefix form (later in the beta)
-
v!logs list [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs -
v!logs list LAB.0001
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
-
/vrcs logs set-defaultManagers & admins Private reply Logs default The channel every event goes to, unless you choose another.Proposes a private channel as the group’s default log channel. A server admin and a group manager both approve it before anything is posted.
- Slash command
-
/vrcs logs set-default - Prefix form (later in the beta)
-
v!logs default #channel [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
channelChannel · required - A private text channel, a thread in one, or a forum post (#channel).
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs default #mod-logs
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Your VRCS access isn't active, so this can't be done. Removing, pausing and disconnecting still work.
- This change widens who sees the group's data, so VRCS must re-check your VRChat group permissions first. Open VRCS on your PC, then try again in a minute.
- Can't confirm access right now. Try again in a few minutes.
- This view is out of date. Run the command again.
- Slow down a moment.
-
/vrcs logs setManagers & admins Private reply Logs set Send one event type or category to its own channel.Routes an event type (moderation.ban) or category (moderation) to a private channel, after the same two approvals.
- Slash command
-
/vrcs logs set - Prefix form (later in the beta)
-
v!logs set <event> #channel [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
eventText · required - An event type or category, for example moderation.ban or moderation.
-
channelChannel · required - A private text channel, a thread in one, or a forum post (#channel).
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs set moderation.ban #ban-log -
v!logs set moderation #mod-logs
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Your VRCS access isn't active, so this can't be done. Removing, pausing and disconnecting still work.
- This change widens who sees the group's data, so VRCS must re-check your VRChat group permissions first. Open VRCS on your PC, then try again in a minute.
- Can't confirm access right now. Try again in a few minutes.
- This view is out of date. Run the command again.
- Slow down a moment.
-
/vrcs logs removeManagers & admins Private reply Logs remove Stop choosing a channel for an event type, so it falls back again.The event type or category goes back to its category’s channel or the default channel.
- Slash command
-
/vrcs logs remove - Prefix form (later in the beta)
-
v!logs remove <event> [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
eventText · required - An event type or category, for example moderation.ban or moderation.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs remove moderation.ban
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
-
/vrcs logs offManagers & admins Private reply Logs off Post nothing for an event type or category.Switches posting off for the event type or category, without falling back to another channel.
- Slash command
-
/vrcs logs off - Prefix form (later in the beta)
-
v!logs off <event> [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
eventText · required - An event type or category, for example moderation.ban or moderation.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs off moderation.unban
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
-
/vrcs logs testManagers & admins Private reply Logs test Post a clearly marked test into the channel an event type goes to.Checks that VRCS can post where the event type (default: the default channel) is routed.
- Slash command
-
/vrcs logs test - Prefix form (later in the beta)
-
v!logs test [event] [group] - Who can use it
- A manager of the group or a server admin
- Discord permission
- Manage Server, or none for the group’s manager
- VRChat permission
- For the group’s manager: owner of the VRChat group, or its data-manage permission, plus audit-log viewing (VRCS checks this)
- Reply
- Only you see the reply
Arguments
-
eventText · optional - An event type or category, for example moderation.ban or moderation.
-
groupGroup · optional - The group: its short code (LAB.0001) or name. Optional when only one group is shown here.
Examples
-
v!logs test -
v!logs test moderation.ban
Common errors
- VRCS by Nyxall isn't set up in this server yet. A server admin can run /vrcs setup.
- You don't have access to that here.
- Slow down a moment.
Account
Your link to Nyxall and your VRChat account.
-
/meEveryone Private reply Me Your link to Nyxall, your VRChat account and your roles here.Who VRCS takes you for in this server.
- Slash command
-
/me - Prefix form (later in the beta)
-
v!me - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- Only you see the reply
Examples
-
v!me
Common errors
- Slow down a moment.
Configuration
How VRCS behaves in this server.
-
v!prefixEveryone Public reply Prefix only, later in the beta Prefix The command prefix in this server.Shows this server’s prefix. If you forgot it, mention the bot: @VRCS prefix.
- Prefix form (later in the beta)
-
v!prefix - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- The reply is posted in the channel
Examples
-
v!prefix
Common errors
- Slow down a moment.
-
v!prefix setManagers & admins Public reply Prefix only, later in the beta Prefix set Change the command prefix in this server.1 to 5 characters, no spaces, at least one symbol, and none of @ # < > : ` \ / * _ ~ | " '. Letters are matched without case.
- Prefix form (later in the beta)
-
v!prefix set <prefix> - Who can use it
- A server admin (Manage Server)
- Discord permission
- Manage Server (or Administrator)
- VRChat permission
- None
- Reply
- The reply is posted in the channel
Arguments
-
prefixPrefix · required - The new prefix, for example ! or vr!.
Examples
-
v!prefix set ! -
v!prefix set vr!
Common errors
- Slow down a moment.
-
v!prefix resetManagers & admins Public reply Prefix only, later in the beta Prefix reset Go back to the default prefix v!.Sets this server’s prefix back to the default.
- Prefix form (later in the beta)
-
v!prefix reset - Who can use it
- A server admin (Manage Server)
- Discord permission
- Manage Server (or Administrator)
- VRChat permission
- None
- Reply
- The reply is posted in the channel
Examples
-
v!prefix reset
Common errors
- Slow down a moment.
System
Status and help.
-
/vrcs helpEveryone Public reply Help Commands by category, or one command in detail.Without a command, lists the commands by category. With one, explains its syntax, who may use it, where the answer goes, and examples.
- Slash command
-
/vrcs help - Prefix form (later in the beta)
-
v!help [command] - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- The reply is posted in the channel
Arguments
-
commandText · optional - A command, for example group summary.
Examples
-
v!help -
v!help group summary -
v!help logs
Common errors
- Slow down a moment.
-
/vrcs statusEveryone Private reply Status What is connected here and how fresh it is.Shows the groups connected to this server, how recently their data was confirmed, their log channels, and whether prefix commands work here. What you see depends on your role.
- Slash command
-
/vrcs status - Prefix form (later in the beta)
-
v!status - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- Only you see the reply
- Aliases
-
v!health
Examples
-
v!status
Common errors
- Slow down a moment.
-
/vrcs aboutEveryone Public reply About The VRCS Discord version this server is using, and where to read more.Shows the version every server runs (one hosted bot, updated centrally: nothing to install), this server’s prefix, and links to the command reference, privacy notes and support.
- Slash command
-
/vrcs about - Prefix form (later in the beta)
-
v!about - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- The reply is posted in the channel
- Aliases
-
v!version
Examples
-
v!about -
v!version
Common errors
- Slow down a moment.
-
/vrcs feedbackEveryone Public reply Feedback Send Nyxall a bug report, an idea, a command issue or a setup issue.Shows four buttons: Bug, Idea, Command issue and Setup issue. The person who clicks one gets a short private form; what they send reaches Nyxall staff with their Discord account and this server, and they get a reference to quote. Five a day per person.
- Slash command
-
/vrcs feedback - Prefix form (later in the beta)
-
v!feedback - Who can use it
- Anyone in the server
- Discord permission
- None
- VRChat permission
- None
- Reply
- The reply is posted in the channel
Examples
-
v!feedback
Common errors
- Slow down a moment.
- This view is out of date. Run the command again.
No commands match
Try another word, or clear the filters to see every command.